Are you worried that if you wait too long, you’ll end up paying thousands more than you need to for your roof? Do you feel unsure whether current roofing price increases are temporary or if costs will just keep climbing year after year?
Roofing material prices have been steadily increasing, and 2026 is no exception. With multiple manufacturers raising prices across shingles, accessories, and metal components, homeowners are left trying to figure out when (or if) the right time to replace their roof actually is. Waiting might feel safer, but it often ends up costing more.
At RoofSmart, we’ve been around to witness how prices have changed for each type of roofing material over the last 15 years. The basic consensus is that everything is getting more expensive and is very likely to continue doing so.
In this article, we’ll break down exactly how much roofing material prices have increased in 2026, which manufacturers have raised their prices, and what it means for your roofing project, so you can plan ahead and avoid unnecessary costs.
|
Manufacturer |
Product Type |
Price Increase |
|
CertainTeed |
Roofing |
Up to 8% |
|
CerainTeed |
Siding |
Up to 6% |
|
GAF |
Residential Roofing |
5% – 8% |
|
Owens Corning |
Shingles & Accessories |
5% – 8% |
|
Atlas Roofing |
Shingles, Underlayment, Ventilation |
5% – 8% |
|
Malarkey |
Residential Roofing |
Up to 8% |
|
TAMKO |
Roofing & Waterproofing |
4% – 5% |
|
Gibraltar |
Aluminum Trim & Flashing |
10% – 13% |
|
Gibraltar |
Steel Trim & Flashing |
~5% |
|
Gibraltar |
Imported Products |
~15% |
On the SRS Distribution webpage, they have a section that publicly posts the price increase letters sent out by manufacturers. Here are the price increases that they included for each manufacturer for the first quarter of 2026:
All of this information is publicly available and comes directly from the letters posted on the SRS Distribution page dedicated to these announcements.
These letters were distributed in February. Some price increases were applied immediately, while others were not implemented until April 15th. By this point, all of these price increases are in place.
SRS Distributions has also announced that, as a result of yet another notice from their residential roofing partners about further price increases, they will be implementing a 6% to 10% price increase for all of their residential products starting on June 1st.
Most of these manufacturers did not give any reasoning behind the price increases, meaning that it is just a standard increase following inflation. Roofing material costs rise steadily every year, so it’s not surprising to get the price increase announcements.
In short, yes, you can expect roofing material prices to continue to increase. The cost of roofing continues to rise year after year.
For example, the Journal of Light Construction (JLC) released this chart last year showing how much it costs to install a new asphalt shingle roof over the years (nationwide data):
This shows a fairly consistent pattern of price increases over the course of 15 years. And, keep in mind that this reflects both material and labor costs (both are increasing). Although there are a few years where prices went down, most of the time,prices have been increasing.
The same applies to metal. The JLC has a chart on metal roof replacement costs as well:
Again, despite one year with a decrease in prices, this chart shows that metal roof installation prices have been rising steadily each year for the last 6 years.
If you’re thinking about replacing your roof sometime in the near future, this is good information to keep in mind. The longer you wait, the more prices will increase. The most affordable time to get a roof is as soon as possible. Again, though, remember that the above charts are nationwide. Seattle is even more expensive due to the high cost of living.
Plus, these manufacturers aren’t really changing up the shingles very much. So, as time goes by, a lot of the time you’re paying more money for a product that hasn’t been improved upon for years. Exceptions to that are in the SBS shingle category.
The number of times that these manufacturers send out letters to increase prices varies quite a bit. You can probably expect them to make a few announcements per year, but it’s not a guaranteed thing.
According to the SRS Distribution webpage, back in 2021, there were a ton of announcements throughout the year, but last year, there were only 2 price increase announcements. It seems like the frequency of announcements has started to settle down in the last couple of years.
2020 and 2021 were unstable years for the economy, which can explain why there were so many price increases back then and why things have been more stable the past few years (hence the fewer announcements).
If you’re looking for an affordable roofing material for your home, asphalt shingles are still the reigning champ (not only in Seattle, but also across the country). Despite the consistent price increases, asphalt shingles are still the cheapest material to install.
Asphalt shingles don’t require advanced skills to install and go on fairly quickly (but that’s not to say that you shouldn’t still find a quality installer!) compared to other materials like metal or synthetic shingles.
Asphalt shingles come in different weights and styles, so some are more expensive than others. Standard shingles are usually the cheapest option, while heavier shingles or luxury styles tend to cost several thousand dollars more to install.
The same weight and type of shingle should cost pretty much the same to install from the top manufacturers (like Owens Corning, CertainTeed, and GAF). You can get lower-quality shingles for lower prices, but they won’t last as long.
As you’ve seen, roofing material prices aren’t staying still. With most major manufacturers increasing prices by 5%–8% so far this year, the cost of a new roof continues to rise.
But materials are only one piece of the puzzle. We haven’t touched on skyrocketing labor costs, just material. With higher minimum wage laws and tighter and more restrictive insurance and regulation compliance costs, you can expect the cost of roofing to continue to outpace the growth in home values. Labor, roof complexity, ventilation upgrades, and additional components all contribute to the total job cost that you’ll pay.
If you’re trying to plan ahead, the most important thing you can do is understand what a full roof replacement actually costs in today’s market, not just the material increases alone.
Read next: How Much Does a New Roof Cost in Seattle in 2026? Updated Prices & Breakdown
https://getroofsmart.com/blog/what-is-the-average-cost-of-a-new-roof-in-the-seattle-area
This guide breaks down real pricing ranges, what drives those costs, and what you should budget for so you can make a smart, well-timed decision.