Are you worried that your new rooftop deck membrane could end up covered in bubbles, wrinkles, or cosmetic defects just a few years after installation? Have you been told that DuraDek can be installed multiple ways and wondered whether choosing the cheaper installation method could create problems down the road?
Most homeowners focus on the membrane product itself, but the installation method can have a major impact on how your rooftop deck looks and performs over time.
At RoofSmart, we help hundreds of customers each year choose the right roof for their budget and needs, even though it means being honest about the pros and cons of every material.
In this article, we'll compare fully adhered and mechanically fastened DuraDek installations, explain the pros and cons of each approach, and help you understand which installation method makes the most sense based on your budget, appearance expectations, and rooftop deck design.
|
Feature |
Fully Adhered DuraDek |
Mechanically Fastened DuraDek |
|
Attachment Method |
Glued to roof deck |
Fastened with screws and plates |
|
Appearance |
Smooth, uniform finish |
May develop wrinkles or bumps |
|
Risk of Air Bubbles |
Very low (when properly installed) |
Higher over time |
|
Wind Resistance |
Excellent |
Very good |
|
Installation Speed |
Slower |
Faster |
|
Labor Requirements |
Higher |
Lower |
|
Material Cost |
Higher |
Lower |
|
Best for Visible Rooftop Decks |
✅ Yes |
⚠️ Acceptable |
|
Best for Covered Deck Systems |
⚠️ Sometimes |
✅ Yes |
|
Weather Limitations During Installation |
More sensitive to cold temperatures |
Fewer limitations |
|
Long-Term Aesthetics |
Superior |
Good but less consistent |
|
Overall Cost |
Higher |
Lower |
DuraDek is a textured membrane installed on rooftop decks. There are two different methods for installing it: fully adhered or mechanically fastened.
How Fully Adhered Membrane Is Installed:
1. Roof Decking: Make sure the roof decking is A-grade plywood with no knots or voids (you can use other materials, but it doesn’t look as good). Lesser quality plywood has knots, which can create air bubbles over time in the membrane. This isn’t a big deal in other types of roofing, but on a rooftop deck, it causes bubbles to form in the membrane. Sticking to top-quality plywood means that you don’t have to worry about air bubbles.
2. Prep: After installing the plywood, fill in all the gaps or screw holes with floor leveler, then sand smooth. This step is technically not required, but we at RoofSmart like to do it because it prevents "telegraphing" (seams showing through) and air bubbles. Telegraphing is not a leak risk, but since it’s a cosmetic defect, it will not be covered by the manufacturer’s warranty. After applying the floor leveler, your roofer will need some time to let it dry. Once it has dried, it needs to be sanded and smoothed.
This is what the floor leveler looks like after it has been applied over the seams and nails. Once it dries, it will be sanded down:
This is how it looks when it’s sanded down and ready for the glue:
3. Adhering with glue: Apply the glue to both surfaces and wait for it to become tacky before bonding. If you don’t wait long enough for the glue to get tacky, then it won’t stick.
4. Heat Welding: The seams are welded together using a heat gun.
How Mechanically Fastened Is Installed:
Each installation method is secure and works well for everyday use of the roof, but if your top priority is ensuring that your rooftop deck membrane continues to look nice over time, then gluing it down is the best option. It makes it less likely for air bubbles to appear.
If you have a rooftop deck and you choose to install DuraDek, we at RoofSmart recommend that you opt to have it glued down (plus the other steps we follow to keep things smooth). That way, your deck won’t look lumpy or bubbly.
If you don’t care as much what your rooftop deck looks like, or you are just installing a membrane that will be covered with tiles, then mechanically fastening it is just fine.
If your membrane is glued down, but it still has air bubbles, it was probably done wrong, or the prep work was overlooked. That’s why it’s important to find a roofer who has experience installing rooftop deck membranes so that they can make sure to avoid these issues.
To help you get a better understanding of how the two installation methods work, here is an overview of the pros and cons of each:
Fully Adhered-
Pros:
Cons:
In sum, the fully adhered membrane is more expensive and takes longer to install, but all the work pays off when the membrane stays flat longer. It doesn’t have any opportunities for air bubbles, and is very secure against strong winds.
The glue does need to be warm to become tacky (the texture you want). It can be used as low as 40 degrees, but the glue will take a very long time to get ready. The warmer it is, the better, so there can be some limitations if you want to glue down the rooftop deck membrane in the fall or winter.
Mechanically Fastened-
Pros:
Cons:
This is a good option if your membrane is going underneath the actual deck or if you have a very strict budget for your rooftop deck. It will look good overall, but might develop some air bubbles or wrinkles over time.
As you've seen, choosing the right DuraDek installation method isn't just about waterproofing. It's also about balancing appearance, performance, and budget. A fully adhered membrane can deliver a smoother, more polished finish, while a mechanically fastened system can help reduce upfront costs.
But the membrane is only one piece of the puzzle. The overall cost of a rooftop deck depends on many factors, including the waterproofing system, deck size, structural requirements, railings, access points, surface finishes, and the complexity of the installation itself.
Read our article “How Much Does It Cost to Install a Rooftop Deck in Seattle?” for a breakdown of the real costs of building a rooftop deck in the Seattle area. It will explain the factors that have the biggest impact on pricing, and help you understand what to budget for a rooftop deck that looks great and stays watertight for years to come.