It depends on the material, how well it was installed and how well it's kept up. Asphalt shingles last about 15 to 25 years, metal about 40 to 70, and slate about 75 years on average, or 80 to 150 years according to RCAW. Around Seattle, what usually cuts a roof's life short is moisture, moss and debris, plus poor ventilation or a poor install.
Below is how long each common roofing material lasts, with the source for every number. After that, we cover what wears a roof out early in Western Washington, what you can do about it, and how to tell when yours is near the end.
One thing to keep in mind as you read: a warranty and a lifespan aren't the same thing. A long warranty tells you what the maker will cover, not how many years the roof will hold up on your house, so we list them separately.
In this article
These are the figures we stand behind, each from a named source. Where a maker doesn't publish a year figure, we don't make one up.
| Material | What it is | How long it lasts | Source |
|---|---|---|---|
| Asphalt shingles | Asphalt and limestone with a layer of granules on top | 15 to 25 years. RCAW puts architectural shingles at a 25 to 30 year lifespan. | RoofSmart; RCAW |
| Metal panels | Usually steel, sometimes aluminum or copper | 40 to 70 years | RoofSmart; RCAW |
| Stone-coated steel tiles | Steel tiles with a stone coating | About 40 to 70 years, according to DECRA, a stone-coated steel maker. Its warranty is separate: a Lifetime Limited Warranty. | DECRA |
| Stamped steel tiles | Steel pressed into a tile shape | No year figure. Kassel & Irons says its steel roofs "last for a lifetime." | Kassel & Irons |
| EuroShield | Made from recycled tires | "50+ years," according to EuroShield. Its warranty is separate: a 50-year limited, prorated warranty. | EuroShield |
| Premium cedar shake | Canadian old-growth clear grain cedar, the highest grade of shake | About 30 to 40 years on average. RCAW also says 30 to 40 years, with proper maintenance. | Cedar Shake & Shingle Bureau; RCAW |
| Lower-grade shake | Pine or American cedar | Substantially less than premium cedar shake | No published figure |
| Clay and concrete tile | Clay or concrete | 50 to 100 years or more, according to the Tile Roofing Industry Alliance. RCAW says 50 to 100 years. The underlayment under the tile wears out first. | Tile Roofing Industry Alliance; RCAW |
| Slate | Natural stone | About 75 years on average, longer for top grades, according to the National Slate Association. RCAW says slate can last 80 to 150 years. | National Slate Association; RCAW |
| Material | What it is | How long it lasts | Source |
|---|---|---|---|
| Torchdown (flat roofs) | Modified bitumen sheets torched in place | 20 years or more with proper installation and maintenance, according to Polyglass. ARMA says asphaltic systems have lifecycles of up to 30 years. | Polyglass; ARMA |
| PVC | A PVC membrane | Typically 20 to 30 years, according to Duro-Last. SPRI says certain configurations have been engineered to endure for 30 years or beyond. | Duro-Last; SPRI |
| TPO | A TPO membrane | No published figure* | No published figure |
* We don't have a published lifespan for TPO. SPRI, the single-ply roofing trade group, says "no guarantee of length of life of any roofing product can be made." GAF and Johns Manville publish only warranty or guarantee terms for TPO, and a warranty term is not a lifespan. The "20 to 30 years" you may see online for TPO comes from third-party sites, not from a maker. Where a maker doesn't publish a year figure, we don't make one up.
Want more detail on one material? We go deeper on how long 30-year shingles really last, 30-year versus 50-year shingles, why metal roofs cost what they do and how long a flat roof lasts.
Two things wear roofs down most around here: moisture and falling debris like leaves and pine needles. Debris holds water against the roof, and trapped moisture speeds up rot and moss. The Cedar Shake & Shingle Bureau makes the same point about cedar roofs.
Asphalt shingles, concrete tile and stone-coated metal tiles are all prone to moss when they stay wet. Metal panels, clay tile and slate hold up better with debris and moisture on them, so they need less upkeep. Asphalt shingles need steady care, especially on wet, shaded lots with trees nearby.
Sun does damage too. UV rays break down roofing materials, which is why most have a protective layer. The granules on asphalt shingles are there to block UV, and once they wash off, the asphalt wears down much faster. Steel panels need a galvanized base layer; without it, a steel roof deteriorates faster and won't reach its full lifespan. Shake roofs are pressure-treated to help protect them from sun and moisture.
You can buy a top-grade shingle, and it will still fail early if it's installed badly. Most of the roofs we repair or replace aren't actually worn out. They failed early because of poor installation, usually a contractor cutting corners or not knowing how to do a detail right.
Flashing is a common example. Flashing is the metal that closes the gaps where the roof meets a wall or an edge. Install it wrong at the roof edge and water runs behind the siding instead of off the roof into the gutter, or it drains onto a lower roof. Either way you get rotting wood in the roof and walls, mold and leaks.
Here's a siding job we did after a roof leak ran down inside the wall:
From the outside, that siding still looked fine. The water had been running behind it long enough to rot the wood underneath. It's an extreme case, but not a rare one, and the same kind of hidden damage can happen under shingles.
Ventilation matters just as much. Without good airflow, moisture builds up under the roof and can lead to mold. The Cedar Shake & Shingle Bureau calls poor ventilation "one of the most common contributors to premature failure."
The most useful thing you can do is get rid of anything that traps moisture on the roof:
If you're building or redesigning a roof, a few design choices help too. Avoid dead valleys, which are spots where two roof planes meet with nowhere for water to drain, so it ponds. You may also need to reroute a gutter that dumps onto a lower roof. Standing water is never good for a roof. And make sure the roof is properly ventilated.
For asphalt shingles, yes. Twenty years is near the end of the 15 to 25 year range. For metal, tile or slate, it's still young.
For a flat torchdown roof, Polyglass says it lasts 20 years or more with proper installation and maintenance, and ARMA says asphaltic systems have lifecycles of up to 30 years, so at 20 years its condition tells you more than its age. Our post on how long a flat roof lasts covers that in detail.
A simple rule of thumb: if a repair would cost more than about 15% of a new roof, it's worth pricing a replacement too. Our Seattle roof replacement cost guide shows what replacements actually cost.
The kind of problem matters as much as the price. The National Slate Association puts it simply: a few broken slates or a small leak is maintenance, while widespread leaks point to replacement. Tile is a special case, because the underlayment under the tile usually wears out before the tile does.
If you're still on the fence, our article on repairing versus replacing a roof walks through the decision.
Want someone to look before you decide? Book a SmartMatch Needs Analysis, or ask for a free estimate. If you don't need a new roof, we'll tell you.
Leaking now? Book a $475 repair visit, plus tax. It covers the first hour, then it's $125 per worker per hour, plus materials.
Even a well-kept roof reaches the end eventually. These are the signs it's worn out:
Spotting one of these doesn't always mean you need a new roof. Our guide to whether you need a new roof goes into more detail.
Here's what heavy moss and heavy granule loss look like: